DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
93
mask
- (Optional) Specifies the mask.
<netmask>
- Specifies the mask.
dscp
- Specifies the value of DSCP.
<value 0-63>
- Specifies the value of DSCP. The DSCP value ranges from 0 to 63.
icmp
- Specifies the ICMP.
type
- (Optional) Specifies that the rule will apply to the ICMP Type traffic value.
<value 0-255>
- Specifies the value between 0 and 255.
code
- (Optional) Specifies that the rule will apply to the ICMP Code traffic value.
<value 0-255>
- Specifies the value between 0 and 255.
igmp
- Specifies the IGMP.
type
- (Optional) Specifies that the rule will apply to the IGMP Type traffic value.
<value 0-255>
- Specifies the value between 0 and 255.
tcp
- Specifies TCP.
src_port
- (Optional) Specifies that the rule will apply to a range of TCP source ports.
<value 0-65535>
- Specifies the value between 0 and 65535.
mask
- (Optional) Specifies the mask.
<hex 0x0-0xffff>
- Specifies the mask.
dst_port
- (Optional) Specifies that the rule will apply to a range of TCP destination ports.
<value 0-65535>
- Specifies the value between 0 and 65535.
mask
- (Optional) Specifies the mask.
<hex 0x0-0xffff>
- Specifies the mask.
flag
- Specifies the TCP flag field value.
all
– (Optional) Specifies to check all paramenters below.
urg
- (Optional) Specifies Urgent Pointer field significant.
ack
- (Optional) Specifies Acknowledgment field significant.
psh
- (Optional) Specifies Push Function.
rst
- (Optional) Specifies to reset the connection.
syn
- (Optional) Specifies to synchronize sequence numbers.
fin
- (Optional) No more data from sender.
udp
- Specifies UDP.
src_port
- (Optional) Specifies the UDP source port range.
<value 0-65535>
- Specifies the value between 0 and 65535.
mask
- (Optional) Specifies the mask.
<hex 0x0-0xffff>
- Specifies the mask.
dst_port
- (Optional) Specifies the UDP destination port range.
<value 0-65535>
- Specifies the value between 0 and 65535.
mask
- (Optional) Specifies the mask.
<hex 0x0-0xffff>
- Specifies the mask.
protocol_id
- Specifies that the rule will apply to the value of IP protocol ID traffic.
<value 0-255>
- Specifies the value between 0 and 255.
user_define
- (Optional) Specifies that the rule will apply to the IP protocol ID and that the
mask options behind the IP header, which has a length of 4 bytes.
<hex 0x0-0xffffffff>
- Specifies that the rule will apply to the IP protocol ID and that the
mask options behind the IP header, which has a length of 4 bytes.
mask
- (Optional) Specifies the mask.
<hex 0x0-0xffffffff>
- Specifies the mask.
packet_content
- Specifies the packet content for the user defined mask.
offset_chunk_1
- (Optional) Specifies that the contents of the offset trunk 1 will be monitored.
<hex 0x0-0xffffffff>
- Enter the offset trunk 1 value used here.
offset_chunk_2
- (Optional) Specifies that the contents of the offset trunk 2 will be monitored.
<hex 0x0-0xffffffff>
- Enter the offset trunk 2 value used here.
offset_chunk_3
- (Optional) Specifies that the contents of the offset trunk 3 will be monitored.
<hex 0x0-0xffffffff>
- Enter the offset trunk 3 value used here.
offset_chunk_4
- (Optional) Specifies that the contents of the offset trunk 4 will be monitored.
<hex 0x0-0xffffffff>
- Enter the offset trunk 4 value used here.
ipv6
- Specifies that the rule applies to IPv6 fields.
class
- Specifies the value of the IPv6 class.
<value 0-255>
- Specifies the value between 0 and 255.
flowlabel
- Specifies the value of the IPv6 flow label.
<hex 0x0-0xfffff>
- Specifies the value of the IPv6 flow label.