DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
579
DGS-3710-12C:admin#show sflow analyzer_server
Command: config sflow analyzer_server
sFlow Analyzer_server Information
------------------------------
Server ID : 1
Owner : master1
Timeout : Infinite
Current countdown time : Infinite
Collector Address : 10.90.90.3
Collector Port : 6343
Max Datagram Size : 1400
Server ID : 3
Owner : master2
Timeout : 400
Current countdown time : 300
Collector Address : 10.90.90.3
Collector Port : 6353
Max Datagram Size : 1400
Server ID : 4
Owner : master3
Timeout : 5000
Current countdown time : 3005
Collector Address : 0.0.0.0
Collector Port : 6343
Max Datagram Size : 1400
DGS-3710-12C:admin#
57-11
create sflow counter_poller ports
Description
This command is used to create the sFlow counter poller. With the poller function, the statistics
counter information with respect to a port will be forwarded to the server at the configured interval.
These counters are RFC 2233 counters.
Format
create sflow counter_poller ports [<portlist> | all] analyzer_server_id <value 1-4> {interval
[disable | <sec 20-120>]}
Parameters
<portlist>
- Specifies the ports to be configured.
all
- Specifies to configure all ports.
analyzer_server_id
- Specifies the ID of an analyzer server where the packet will be forwarded.
<value 1-4>
- Specifies the ID of an analyzer server where the packet will be forwarded.
interval
- (Optional) Specifies the maximum number of seconds between successive statistic
counters information. If set to disable, the counter-poller is disabled. If the interval is not
specified, its default value is disable.