DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
154
Format
show cfm mp_ltr_all
Parameters
None.
Restrictions
None.
Example
To display the configuration of the all-MPs-reply-to-LTR function:
DGS-3710-12C:admin#show cfm mp_ltr_all
Command: show cfm mp_ltr_all
All MPs reply LTRs: Disabled
DGS-3710-12C:admin#
12-27
show cfm pkt_cnt
Description
This command is used to display the CFM packet’s RX/TX counters.
Format
show cfm pkt_cnt {[ports <portlist> {[rx | tx]} | [rx | tx] | ccm]}
Parameters
ports
- (Optional) Specifies the port counters to display. If not specified, all ports will be
displayed.
<portlist>
- Specifies a list of ports.
rx
- (Optional) Display the RX counter. If not specified, both the RX and TX counters will be
displayed.
tx
- (Optional) Display the TX counter. If not specified, both the RX and TX counters will be
displayed.
rx
- (Optional) Display the RX counter. If not specified, both the RX and TX counters will be
displayed.
tx
- (Optional) Display the TX counter. If not specified, both the RX and TX counters will be
displayed.
ccm
- (Optional) Display the CCM RX counters.
Restrictions
None.