DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
438
Example
To display the host IP information on the default VLAN:
DGS-3710-12C:admin#show mld_snooping host vlan default
Command: show mld_snooping host vlan default
VLAN ID : 1
Group : FF1E::1
Port : 2
Host : 2001::1
VLAN ID : 1
Group : FF1E::2
Port : 3
Host : 2001::1
VLAN ID : 1
Group : FF1E::3
Port : 4
Host : 2001::1
VLAN ID : 1
Group : FF1E::1
Port : 5
Host : 2001::2
Total Entries: 4
DGS-3710-12C:admin#
42-23
show mld_snooping group port_num
Description
The command is used to display how many ports joined a specific MLD snooping group.
Format
show mld_snooping group port_num {[vlan <vlan_name 32> | vlanid <vlanid_list>]
{<ipv6addr>}}
Parameters
vlan
- (Optional) Specifies the VLAN name used for the display.
<vlan_name 32>
- Enter the VLAN name used here. This name can be up to 32 characters
long.
vlanid
- (Optional) Specifies the VLAN ID used for the display.
<vlanid_list>
- Enter the VLAN ID used here.
<ipv6addr>
- (Optional) Enter the group’s IPv6 address, to be displayed, here.
Restrictions
None.