DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
224
Example
To configure manual bindings:
DGS-3710-12C:admin#create dhcp pool manual_binding engineering 10.10.10.1
hardware_address 00-80-C8-02-02-02 type Ethernet
Command: create dhcp pool manual_binding engineering 10.10.10.1
hardware_address 00-80-C8-02-02-02 type Ethernet
Success.
DGS-3710-12C:admin#
19-18
delete dhcp pool manual_binding
Description
This command is used to delete DHCP server manual binding.
Format
delete dhcp pool manual_binding <pool_name 12> [<ipaddr> | all]
Parameters
<pool_name 12>
- Specifies the DHCP pool name.
<ipaddr>
- Specifies the IP address which will be assigned to a specified client.
all
- Specifies to delete all IP addresses.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete DHCP server manual binding:
DGS-3710-12C:admin#delete dhcp pool manual_binding engineering 10.10.10.1
Command: delete dhcp pool manual_binding engineering 10.10.10.1
Success.
DGS-3710-12C:admin#
19-19
clear dhcp binding
Description
This command is used to clear a binding entry or all binding entries in a pool or clears all binding
entries in all pools. Note that this command will not clear the dynamic binding entry which matches
a manual binding entry.