DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
668
1q_vlan
- Specifies the VLAN is a 802.1q VLAN.
advertisement
- Specifies to allow the Switch sending out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create a VLAN with the name “v2” and VLAN ID 2:
DGS-3710-12C:admin#create vlan v2 tag 2 type 1q_vlan advertisement
Command: create vlan v2 tag 2 type 1q_vlan advertisement
Success.
DGS-3710-12C:admin#
To create a private VLAN with the name “v3” and VLAN ID 3:
DGS-3710-12C:admin#create vlan v3 tag 3 type private_vlan
Command: create vlan v3 tag 3 type private_vlan
Success.
DGS-3710-12C:admin#
72-2
create vlan vlanid
Description
This command is used to create a VLAN on the switch. The VLAN ID must be always specified for
creating a VLAN.
Format
create vlan vlanid <vidlist> {advertisement}
Parameters
<vidlist>
- Specifies the VLAN ID of the VLAN to be created.
advertisement
- (Optional) Specifies to allow the Switch sending out GVRP packets to outside
sources, notifying that they may join the existing VLAN.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create a VLAN with VLAN ID 2: