DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
651
<start_time hh:mm>
- Configure the start time in hh:mm of DST.
e_date
- Configure the end date number of DST.
<end_date 1-31>
- Configure the end date number of DST. The values are 1 to 31.
e_mth
- Configure the end month number of DST.
<end_mth 1-12>
- Configure the end month number of DST. The values are 1 to 12.
e_time
- Configure the end time of DST.
<end_time hh:mm>
- Configure the end time in hh:mm of DST.
offset
- Specifies the number of minutes to add or to subtract during summertime. The range of
offsets are 30, 60, 90, and 120. The default value is 60.
30
- Specifies 30 minutes to add or to subtract during summertime.
60
- Specifies 60 minutes to add or to subtract during summertime.
90
- Specifies 90 minutes to add or to subtract during summertime.
120
- Specifies 120 minutes to add or to subtract during summertime.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure time:
DGS-3710-12C:admin#config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00
e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30
Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2
e_day wed e_mth 10 e_time 15:30 offset 30
Success.
DGS-3710-12C:admin#
69-8
show time
Description
This command is used to display current time states.
Format
show time
Parameters
None.
Restrictions
None.
Example
To show time: