DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
95
delete access_id
- Specifies to delete the access ID.
<value 1-128>
- Specifies the value between 1 and 128.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure an access list entry:
DGS-3710-12C:admin#config access_profile profile_id 2 add access_id 1 ip vlan
default source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp port 1 permit
Command: config access_profile profile_id 2 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp port 1 permit
Success.
DGS-3710-12C:admin#
6-4
show access_profile
Description
This command is used to display the current access list table.
Format
show access_profile {[profile_id <value 1-12> | profile_name <name 1-32>]}
Parameters
profile_id
- (Optional) Specifies the index of the access list profile.
<value 1-12>
- Specifies the profile ID between 1 and 12.
profile_name
- (Optional) Specifies the name of the access list profile.
<name 1-32>
- Enter the profile name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To display the current access list table:
DGS-3710-12C:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 4
Total Used HW Entries : 4
Total Available HW Entries : 1532