DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
17
Example
To configure the alarm temperature threshold high of 80:
DGS-3710-12C:admin#config temperature threshold high 80
Command: config temperature threshold high 80
Success.
DGS-3710-12C:admin#
2-12
show serial_port
Description
This command is used to display the current console port setting.
Format
show serial_port
Parameters
None.
Restrictions
None.
Example
To display the console port setting:
DGS-3710-12C:admin#show serial_port
Command: show serial_port
Baud Rate : 115200
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DGS-3710-12C:admin#
2-13
config serial_port
Description
This command is used to configure the serial bit rate that will be used to communicate with the
management host and the auto logout time for idle connections.