DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
278
DGS-3710-12C:admin#enable igmp_snooping
Command: enable igmp_snooping
Success.
DGS-3710-12C:admin#
27-6
disable igmp_snooping
Description
This command is used to disable IGMP snooping on the switch. IGMP snooping can be disabled
only if IP multicast routing is not being used. Disabling IGMP snooping allows all IGMP and IP
multicast traffic to flood within a given IP interface.
Format
disable igmp_snooping
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable IGMP snooping:
DGS-3710-12C:admin#disable igmp_snooping
Command: disable igmp_snooping
Success.
DGS-3710-12C:admin#
27-7
show igmp_snooping
Description
This command is used to display the current IGMP snooping configuration on the switch.
Format
show igmp_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan
- (Optional) Specifies the VLAN to display the IGMP snooping configuration.