DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
166
Example
To assign a static VLAN to be a guest VLAN:
DGS-3710-12C:admin#create authentication guest_vlan vlan guestVLAN
Command: create authentication guest_vlan vlan guestVLAN
Success.
DGS-3710-12C:admin#
15-2
delete authentication guest_vlan
Description
This command is used to delete a guest VLAN setting, but not a static VLAN. All the ports, that are
enabled as guest VLANs, will be moved to the original VLAN after deleting the guest VLAN. For
further description of this command, please see the description for
config authentication
guest_vlan ports
.
Format
delete authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Parameters
vlan
- Specifies the guest VLAN by VLAN name.
<vlan_name 32>
- Specifies the guest VLAN by VLAN name. The VLAN name can be up to
32 characters long.
vlanid
- Specifies the guest VLAN by VLAN ID.
<vlanid 1-4094>
- Specifies the guest VLAN by VLAN ID. The VLAN ID value must be
between 1 and 4094.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete a guest VLAN setting:
DGS-3710-12C:admin#delete authentication guest_vlan vlan guestVLAN
Command: delete authentication guest_vlan vlan guestVLAN
Success.
DGS-3710-12C:admin#
15-3
config authentication guest_vlan
Description
This command is used to assign or remove ports to or from a guest VLAN.