DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
450
DGS-3710-12C:admin#config mld_snooping multicast_vlan forward_unmatched enable
Command: config mld_snooping multicast_vlan forward_unmatched enable
Success.
DGS-3710-12C:admin#
43-14
config mld_snooping multicast_vlan auto_assign_vlan
Description
This command is used to enable or disable the auto assignment of MLD control packets to the
right ISM VLAN. If auto assign VLAN is enabled, the switch would check if the group matches with
the profiles of all multicast VLANs that belongs to the ingress port. If there is a match, the result
will read "in profile" and the matching multicast VLAN will be configured as a packet VLAN. If this
function is disabled, the switch will do VID checking first If the group does not match the current
profiles bound to the multicast VLAN, the switch will drop this packet.
Format
config mld_snooping multicast_vlan auto_assign_vlan [enable | disable]
Parameters
enable
- Specifies to enable the auto assign VLAN function used in MLD snooping.
disable
- Specifies to disable the auto assign VLAN function used in MLD snooping.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
This example enables the auto assign VLAN function of multicast VLAN.
DGS-3710-12C:admin#config mld_snooping multicast_vlan auto_assign_vlan enable
Command: config mld_snooping multicast_vlan auto_assign_vlan enable
Success.
DGS-3710-12C:admin#