DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
538
DGS-3710-12C:admin#config per_queue bandwidth_control ports 1-10 1 max_rate 100
Command: config per_queue bandwidth_control ports 1-10 1 max_rate 100
The setting value is not an integer multiple of granularity 64, closest value
64 is chosen.
Success.
DGS-3710-12C:admin#
53-4
show per_queue bandwidth_control
Description
This command is used to display the bandwidth control setting of per egress queue for each port.
Format
show per_queue bandwidth_control {<portlist>}
Parameters
<portlist>
- (Optional) Specifies a range of ports to be displayed.
Restrictions
None
Example
To display the bandwidth control setting of the per queue egress for port 1:
DGS-3710-12C:admin#show per_queue bandwidth_control 1
Command: show per_queue bandwidth_control 1
Queue Bandwidth Control Table On Port: 1
Queue Min Rate(Kbit/sec) Max Rate(Kbit/sec)
0 No Limit No Limit
1 No Limit No Limit
2 No Limit No Limit
3 No Limit No Limit
4 No Limit No Limit
5 No Limit No Limit
6 No Limit No Limit
7 No Limit No Limit
DGS-3710-12C:admin#