DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
584
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable sRED:
DGS-3710-12C:admin#disable sred
Command: disable sred
Success.
DGS-3710-12C:admin#
58-3
config sred
Description
This command is used to configure sRED threshold per port, or per port per queue.
Format
config sred [<portlist> | all] [<class_id 0-7> | all] {threshold {low <value 0-100> | high <value
0-100>} | drop_rate {low <value 1-8> | high <value 1-8>} | drop_green [enable | disable]}
Parameters
<portlist>
- Enter the list of ports, used for this configuration, here.
all
- Specifies that all the ports will be used.
<class_id 0-7>
- Enter the CoS Class ID used here. This value must be between 0 and 7.
all
- Specifies that all the CoS Class ID will be used.
threshold
- (Optional) Specifies the threshold of the percent of space utilized.
low
- Specifies the low threshold value used.
<value 0-100>
- Enter the low threshold value used here. This value must be between 0
and 100.
high
- Specifies the high threshold value used.
<value 0-100>
- Enter the high threshold value used here. This value must be between 0
and 100.
drop_rate
- (Optional) Specifies the drop rate value used.
low
- Specifies the low drop rate value used.
<value 1-8>
- Enter the low drop rate value used here. This value must be between 1 and
8.
high
- Specifies the high drop rate value used.
<value 1-8>
- Enter the high drop rate value used here. This value must be between 1 and
8.
drop_green
- (Optional) Specifies the drop green parameters.
enable
- Probabilistic drop yellow and red colored packets if the queue depth is above the low
threshold, and probabilistic drop green colored packets if the queue depth is above the