DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
8
Chapter 2
Basic Management
Commands
create account
[admin | operator | user] <username 15>
enable password encryption
disable password encryption
config account
<username>
{encrypt [plain_text | sha_1] <password>}
show account
delete account
<username>
show session
show switch
show environment
config temperature
[trap | log] state [enable | disable]
config temperature threshold
{high <temperature> | low <temperature>}(1)
show serial_port
config serial_port
{ baud_rate [ 9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes |
5_minutes | 10_minutes |15_minutes]}(1)
enable clipaging
disable clipaging
enable telnet
{<tcp_port_number 1-65535>}
disable telnet
enable web
{<tcp_port_number 1-65535>}
disable web
save
{[config <config_id 1-2> | log | all]}
reboot
{force_agree}
reset
{[config | system {default}]} {force_agree}
login
logout
clear
config terminal width
[default | <value 80-200>]
show terminal width
config external_alarm channel
<value 1-4> message <sentence 1-128>
show external_alarm
show device_status
show current_alarm
2-1
create account
Description
This command creates user accounts. The username is between 1 and 15 characters, the
password is between 0 and 15 characters. The number of accounts (including admin, operator,
and user) is up to eight. By default, there is one administrator account already created. The
username for this default account is
admin
and the password is
1234
.
Format
create account [admin | operator |user] <username 15>