![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-456.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
452
DGS-3710-12C:admin#config greeting_message
Command: config greeting_message
Greeting Messages Editor
==============================================================================
DGS-3710-12C Fast Ethernet Switch
Command Line Interface
Firmware: Build 1.00.029
Copyright(C) 2012 D-Link Corporation. All rights reserved.
==============================================================================
<Function Key> <Control Key>
Ctrl+C Quit without save left/right/
Ctrl+W Save and quit up/down Move cursor
Ctrl+D Delete line
Ctrl+X Erase all setting
Ctrl+L Reload original setting
------------------------------------------------------------------------------
Success.
DGS-3710-12C:admin#
44-2
show greeting_message
Description
This command is used to display the currently configured greeting message on the switch.
Format
show greeting_message
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display the currently configured greeting message: