DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
620
Note:
If a community string is not specified, all community string information will be
displayed.
Restrictions
None.
Example
To display the current community string configurations:
DGS-3710-12C:admin#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
---------------------------- ------------------------ ------------
private CommunityView read_write
public CommunityView read_only
Total Entries : 2
DGS-3710-12C:admin#
62-11
config snmp engineID
Description
This command is used to configure an identifier for the SNMP engine on the switch. Associated
with each SNMP entity is a unique engine ID.
Format
config snmp engineID <snmp_engineID 10-64>
Parameters
<snmp_engineID 10-64>
- Specifies the identify for the SNMP engine on the switch.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure an identifier for the SNMP engine on the switch: