DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
79
DGS-3710-12C:admin#delete authen server_group mix_1
Command: delete authen server_group mix_1
Success.
DGS-3710-12C:admin#
5-17
show authen server_group
Description
This command is used to display the authentication server groups.
Format
show authen server_group {<string 15>}
Parameters
<string 15>
- (Optional) Specifies the built-in or user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all authentication server groups:
DGS-3710-12C:admin#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
--------------- --------------- --------
mix_1 10.1.1.222 TACACS+
radius 10.1.1.224 RADIUS
tacacs 10.1.1.225 TACACS
tacacs+ 10.1.1.226 TACACS+
xtacacs 10.1.1.227 XTACACS
Total Entries : 5
DGS-3710-12C:admin#
5-18
create authen server_host
Description
This command is used to create an authentication server host. When an authentication server host
is created, the IP address and protocol are the index. That means more than one authentication
protocol service can be run on the same physical host. The maximum supported number of server
hosts is 16.