![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-259.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
255
DGS-3710-12C:admin#config erps raps_vlan 4094 rpl_port west
Command: config erps raps_vlan 4094 rpl_port west
Success.
DGS-3710-12C:admin#config erps raps_vlan 4094 rpl_owner enable
Command: config erps raps_vlan 4094 rpl_owner enable
Success.
DGS-3710-12C:admin#
To set the R-APS protected VLAN parameter:
DGS-3710-12C:admin#config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Command: config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Success.
DGS-3710-12C:admin#
To set the R-APS timer parameter:
DGS-3710-12C:admin#config erps raps_vlan 4094 timer holdoff_time 100 guard_time
1000 wtr_time 10
Command: config erps raps_vlan 4094 timer holdoff_time 100 guard_time 1000
wtr_time 10
Success.
DGS-3710-12C:admin#
24-6
config erps log
Description
This command is used to configure the ERPS log state.
Format
config erps log [enable | disable]
Parameters
enable
- Enable the log state. The default value is disabled.
disable
- Disable the log state.
Restrictions
Only Administrator and Operator-level users can issue this command.