DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
311
29-6
show ipv6route
Description
This command is used to display the switch’s current IPv6 routing table.
Format
show ipv6route {<ipv6networkaddr>}
Parameters
<ipv6networkaddr>
- (Optional) Specifies the IPv6 network address.
Restrictions
None.
Example
To display an IPv6 route:
DGS-3710-12C:admin#show ipv6route
Command: show ipv6route
IPv6 Prefix: ::/0 Protocol: Static Metric: 1
Next Hop : FEC0::5 IPIF : System
Total Entries: 1
DGS-3710-12C:admin#