DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
633
DGS-3710-12C:admin#show subnet_vlan network 172.168.1.1/24
Command: show subnet_vlan network 172.168.1.1/24
IP Address/Subnet Mask VLAN Priority
------------------------ ----- ----------
172.168.1.1/24 10 2
DGS-3710-12C:admin#
To display a specied IPv6 subnet VLAN entry:
DGS-3710-12C:admin#show subnet_vlan network fe80::250:baff::0/64
Command: show subnet_vlan network fe80::250:baff::0/64
IP Address/Subnet Mask VLAN Priority
------------------------ ----- ----------
fe80::250:baff::0/64 10 2
DGS-3710-12C:admin#
To display all subnet VLAN entries:
DGS-3710-12C:admin#show subnet_vlan
Command: show subnet_vlan
IP Address/Subnet Mask VLAN Priority
------------------------ ----- ----------
172.168.1.1/24 10 2
172.18.211.1/255.255.255.0 20 3
172.18.211.6/24 5 1
fe80::250:baff::0/64 10 2
Total Entries: 4
DGS-3710-12C:admin#
64-4
config vlan_precedence ports
Description
This command is used to configure vlan classification precedence on each port.
You can specify the order of MAC-based VLAN classification and subnet VLAN classification.
If a port’s VLAN classification is MAC-based precedence, MAC-based VLAN classification will
process at first. If MAC-based VLAN classification fails, the subnet VLAN classification will be
executed.
If a port’s VLAN classification is subnet VLAN precedence, the subnet VLAN classification will
process at first. If subnet VLAN classification fails, the MAC-based VLAN classification will be
executed.