![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-270.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
266
<macaddr>
- Specifies the MAC address.
static
- (Optional) Specifies to display all permanent entries.
aging_time
- Specifies to display the unicast MAC address aging time.
security
– Specifies to display the security settings.
Note:
If no parameter is specified, all unicast FDB entries will be displayed.
Restrictions
None.
Example
To display unicast MAC address table:
DGS-3710-12C:admin#show fdb
Command: show fdb
Unicast MAC Address Ageing Time = 300
VID VLAN Name MAC Address Port Type
---- ------------------------------- ------------------ ------ --------------
1 default 00-00-00-00-01-02 5 Permanent
1 default 00-01-02-03-04-00 CPU Self
Total Entries : 2
DGS-3710-12C:admin#
25-10
show ipfdb
Description
This command is used to display the IP address forwarding table on the switch.
Format
show ipfdb {<ipaddr>}
Parameters
<ipaddr>
- (Optional) Specifies the IP address of the forwarding table.
Restrictions
None.
Example
To display the IP address forwarding table on the switch: