DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
217
Example
To configure the domain name option of the DHCP pool:
DGS-3710-12C:admin#config dhcp pool domain_name dname dname.com
Command: config dhcp pool domain_name dname dname.com
Success.
DGS-3710-12C:admin#
19-8
config dhcp pool dns_server
Description
This command is used to specify the IP address of a DNS server that is available to a DHCP client.
Up to three IP addresses can be specified on one command line. If DNS server is not specified,
the DNS server information will not be provided to the client. If this command is input twice for the
same pool, the second command will overwrite the first command.
Format
config dhcp pool dns_server <pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
Parameters
<pool_name 12>
- Specifies the DHCP poll name.
<ipaddr>
- (Optional) Specifies the IP address of the DNS server. Up to three IP addresses can
be specified on one command line.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the DNS server’s IP address:
DGS-3710-12C:admin#config dhcp pool dns_server dserver 10.10.10.1
Command: config dhcp pool dns_server dserver 10.10.10.1
Success.
DGS-3710-12C:admin#
19-9
config dhcp pool netbios_name_server
Description
This command is used to specify the NetBIOS WINS server that is available to a Microsoft DHCP
client. Up to three IP addresses can be specified on one command line.
Windows Internet Naming Service (WINS) is a name resolution service that Microsoft DHCP
clients use to correlate host names to IP addresses within a general grouping of networks. If a
NetBIOS name server is not specified, the NetBIOS name server information will not be provided